|
 Pittsburgh Process Equipment
C o m p a n y , I n
c .
640 Long Road, Pittsburgh, PA 15235
Phone: (412)243-1000 Fax: (412)243-1010
|
40 Years of Excellence since 1965
Western Pennsylvania's Leading Pump Distributor
|
We accept Visa, Mastercard and American Express
|
For Product Information Click on Manufacturers Logo or Scroll Down Page
Products
Click Here for
Additional Information
Wilden Pump and Engineering
-
The Right Product. Seven pump sizes from .25" to 4", Flows to 275GPM, Pressures to 125PSI and a wide range of construction materials along with a complete line of
accessories that enhance the range of applications.
-
Wilden's Air Distribution Systems. Pro-Flo / Wil-Flo / Turbo-Flo / Accu-Flo Systems. On/Off reliability, Lube-Free Operation, Anti-Freezing, High Efficiency and an electrical
interface with the Accu-Flo system.
Back to Manufacturers Logos
Click Here for Additional Information
GRISWOLD PUMP COMPANY
A N Y T H
I N G B U T S T A N D A R D
-
Griswold Pump Company is a well established full-line pump manufacturer, with product lines dating back over 70 years.
At our facility in Thomasville Georgia, Griswold designs and manufactures a variety of pumps,
including ANSI, end suction centrifugals, self-priming and submersible/vertical turbines. With hundreds of thousands of pump installations worldwide, Griswold serves a broad range of chemical process, industrial and municipal applications.
Back to Manufacturers Logos
Click Here for Additional Information
blackmer
PEOPLE PROVIDING FLOW TECHNOLOGY WORLDWIDE
-
Eccentric Disc Pump. Sealless low shear positive displacement pump designed to handle fine chemicals, pharmaceutical cosmetics, agrochemicals, papermaking and
petrochemicals.
-
Peristaltic Pump. Positive displacement hose pump that handles fluids ranging from viscous and/or abrasive sludges to water thin, non-lubricating fluids, corrosive
chemicals or sheer sensitive materials.
Back to Manufacturers Logos
Click Here for Additional Information
Grundfos Pumps Corporation
-
Vertical Multi-Stage Centrifugal Pumps for a wide range of applications. (Deaeration, Pressure Boosting, Water Treatment: RO, DI and Filtration, Parts Washers, Car Wash
Systems, Jockey Pumps, Boiler Feed etc.)
-
BM Pumps Sealless Multi-Stage High Pressure Pumps, (Max. Flow 1,100 GPM, Max. Pressure 1,100 PSI.)
-
Groundwater Pumps Stainless Steel Submersible Well Pumps, Jet Pumps, Sump Pumps, Effluent and Sewage Pumps.
-
HVAC Pumps Small and Large Circulating Pumps and Accessories. (Apartments, Condominiums, Office, Hospitals, Schools etc.)
Back to Manufacturers Logos
Click Here for Additional Information
Carver Pumps
-
General Service Pumps. For general service applications, we offer horizontal and vertical pumps. Our GHF and GHC Series horizontal pumps are available in close coupled or frame mounted arrangements. These pumps are offered in cast iron, 316 SS fitted cast iron, or all 316 SS executions.
Standard features include a back pull-out design for
simplified maintenance and inspection ease and 316 SS shaft sleeves for extended life expectancy.
Our GVC and GVT Series vertical pumps are available
as standard tank mounted units or the more operator-friendly top pull-out designs for depths to 36 inches. For anything deeper, the GVS Series sump pump is offered for depths to 20 feet. All are available in cast iron, 316 SS fitted cast iron, or all 316 SS executions and come with a
broad selection of discharge piping, top plate and underline choices.
Together, these General Service pumps offer hydraulic
coverage to 10,000 GPM and 500 ft. TDH, which makes it hard to find an application we cannot handle.
In addition to these standard pumps, we also bring
the benefit of 60 years experience in special application pumps. So, if you require special flows, pressures, temperatures, mounting or, drive configurations, we can create a pump specifically for you.
-
Process Industry Pumps. For process industry applications, Carver can be
found whenever heavy-duty pumps are specified. Our process pumps include a full range of horizontal and vertical API pumps, multistage ring section, self-priming and solids handling designs.
The Maxum Series is our medium duty process pump designed for the needs of the ANSI and API pump markets. Available as either foot or centerline mounted, it provides flows to 9,500 GPM and heads to 750 ft. with steel, 316 SS,
CD4MCu, Alloy 20, Hastelloy B or C, Monel, and titanium material options.
The RS Series ring section, multistage pumps are
available as horizontal or vertical units. The RS6 has 600 lb. flanges for heads to 1,900 ft. while the RS9 has 900 lb. flanges for discharge heads to 2,800 ft.
Both are available in ductile iron or CD4MCu with
iron, bronze or CD4MCU internals. And, like the Maxum Series, the RS can be motor or turbine driven and is available in high temperature and magnetic drive arrangements, as well.
Accessories and auxiliaries, such as seal flush
systems, vibration detectors, vapor tight vertical configurations, and full API baseplates are commonly available. Complete performance testing is also available.
-
Marine Pumps. For marine applications, our pumps can be found on just about anything that floats. Not only are we a mainstay in the commercial marine industry, we also are proud of our long-term partnerships with the Military Sealift Command and U.S. Coast Guard and have been a supplier on
every major Navy shipbuilding program for the last 40 years.
Our shipboard pumps include a wide assortment of end
suction (close coupled or frame mounted), horizontally or vertically mounted, axially split-case, low NPSH vertical in-line pumps. All of these pumps meet the strenuous military specifications for high impact shock loading, environmental impact, vibration, and structure-borne,
fluid-borne and air-borne noise.
On the commercial marine side, we have a full line of
both horizontal and vertical pumps. The MHF is our horizontal close coupled series. Our vertical pumps include the MVP vertical pumps in-line, pedestal mounted series, and the MVS vertical sump series capable of pumping from tanks 20 feet below deck.
These pumps are available in ductile iron (all iron,
bronze or 316 SS fitted), 316 SS, Ni-Al-Brz, and titanium executions. We have also developed a new proprietary high strength, corrosion resistant composite material for our pump internals.
This advanced material, which has already been put
into service by the U.S. Navy, is just another example of how Carver creates value for our customers. Designed for onboard pumping of fresh water, seawater, and other fluids, these pumps can be used on everything from U.S. Coast Guard cutters and icebreakers to barges, ocean-going
tankers, workboats, ferry boats, small pleasure craft, and even luxury yachts.
Engineered for reliability with a minimum of space
required, our commercial marine pumps are built in accordance with ASTM F-998, USCG and American Bureau of Shipping (ABS) requirements and can be tested to government shock and vibration specifications. Certifications from the various technical societies (such as, Lloyd's Det Norske
Veritas) can also be obtained.
Most importantly, as with all our other pumps, these
pumps offer the reliability, low total life cost, and lasting value that has made Carver one of the most trusted names in pumps.
Back to Manufacturers Logos
Click Here for Additional Information
Ebara Standard Pump Division
-
Waste-water With horsepower ranges up to 800 HP and capacities to 100,000 GPM, Ebara Standard Pump Division's cast iron submersible pumps meet a wide range of
industrial, municipal, flood control, and residential water and waste-water applications. The cast iron line of pumps includes submersible sewage, submersible sump, semi-vortex, vortex, grinder, non-clog, and dry pit models.
-
Commercial
Pumps Pro Steel pumps that include end
suction, self priming, single stage, two stage and multi-stage high pressure pumps constructed of stainless steel.
Back to Manufacturers Logos
Click Here for
Additional Information
Viking Pump
-
The Universal Seal Series. The Universal Seal series pumps are similar to the Heavy Duty series, offering thrust control and adjustable rotor clearances to compensate for
wear and viscosity.
An enlarged bearing housing at the rear of the pump provides easy drive-end access, and accepts various sealing options including:
-
packing
-
component mechanical seals
-
cartridge single-mechanical seals
-
cartridge double-mechanical seals, and
-
cartridge triple-lip seals.
This allows drive-end access for maintenance or replacement of cartridge seals without opening the head and pulling the rotor/shaft. Some sizes also offer behind-the-rotor component mechanical seals.
-
The High Speed Compact Series. The High Speed Compact series pumps are of a Heavy Duty design, with thrust control and micrometer adjustments for accurate rotor
positioning. Designed to operate at motor speeds, they are offered in a close-coupled version for minimum footprint.
Component mechanical seals are standard, along with integral pressure relief valve.
-
The General Purpose pumps. The General Purpose pumps utilize a simple and economical "floating rotor" design, in which the rotor/shaft is not retained by a
thrust bearing, and is allowed to "float" within the pump head. This reduces the available pressure and allowable viscosity compared to a thrust bearing design like the Universal Seal or Heavy Duty series, but is well suited to many medium duty applications.
Depending on the model and size, sealing options include packing, component mechanical seals or lip seals.
Some models are available with optional UL listing for Fuel Oil, for use in the assembly of power-operated oil burners or for use as oil-transfer pumps for No. 6 or lighter fuel oil (Series 432-X, sizes C - HL, and Series
456-X, sizes C - FH).
-
The Viking Mag Drive® Series. The Viking Mag Drive® series of sealless internal gear pumps eliminate the possibility of shaft leakage by
eliminating the seal. The driver turns an outer magnet, whose force passes through a hermetically sealed canister to inner magnets, which in turn drive the pump shaft. Mag drive pumps are used wherever leakage is a problem, such as acids, volatile organic chemicals, or toxic
fluids.
Materials of Construction Options
-
Cast Iron
-
Steel Externals
-
Stainless Steel
Back to Manufacturers Logos
Click Here for
Additional Information
Cat Pumps
-
Wide market range. Serving A Wide Range Of Fluid Handling Needs For Industrial, Oil, Agricultural pollution Control, Reverse Osmosis, Pressure Washer &
Car Wash
Markets.
Back to Manufacturers Logos
Click Here for Additional Information
Finish Thompson Pumps
-
Drum Pumps transfer hard-to-handle acids, chemicals and solvents. Air, electric, weatherproof, TEFC and explosion proof motors.
Back to Manufacturers Logos
Deming Pumps
-
Centrifugal Pumps End suction (close-coupled and frame mounted), ANSI, In-Line, Vertical Process, Split-Case and Solids Handling.
-
Vertical Turbine Pumps short-set or deep-set configuration to meet exact application requirements. General service, Transfer, Vertical can, Gasoline or Fuel oil, Propeller and Mixed
flow and Submersible Turbine pumps.
Back to Manufacturers Logos
Click Here for Additional Information
Barnes Pumps
Back to Manufacturers Logos
Other Represented Manufacturers:
Back to Manufacturers Logos
Capabilities
Let Pittsburgh Process Equipment Company Meet Your Needs:
Complete System Design & Fabrication
|
Custom Fabricated
Pump Skids
|
Complete Pump
Repair Service
|
- Complete systems for batching, flow control, pressure control and other customer specified control requirements.
|
- Base Plates carbon steel, stainless steel, and other customer specified materials.
|
- Quality Repairs Quality service and repairs performed by trained technicians.
|
Back to top of page
Contacts
Phone (412)243-1000 Fax (412)243-1010
Back to top of page
